Average Atom Model in Hot Plasmas

Ａｖｅｒａｇｅ　Ａｔｏｍ　Ｍｏｄｅｌ　ｉｎ　Ｈｏｔ　ＰｌａｓｍａｓＡｖｅｒａｇｅＡｔｏｍＭｏｄｅｌｉｎＨｏｔＰｌａｓｍａｓ￥ＹｕａｎＪｉａｎｈｕｉ；ＳｕｎＹｏｎｇｓｈｅｎｇ；ＺｈｅｎｇＳｈａｏｔａｎｇ（ＩｎｓｔｉｔｕｔｅｏｆＡｐｐｌｉｅｄＰｈｙｓｉｃ...     

Ga1-xInxAs/InAsyP1-y/InP异质结的MOCVD生长及表征

Ga1-xInxAs(x>0.53)材料是未来长距离低损耗光纤通信的理想光源材料和探测器材料之一.我们采用水平常压MOCVD系统,在InP衬底上成功地生长了Ga1-xInxAs(x>0.53)/InAsyP1-y/Inp异质结材料.其中InAs1-yPy为组份阶梯变化的多层结构.由样品的(400)面X光衍射结果测定了各层组份.由二次离子质谱(SIMS)得到了样品剖面组份变化结果,证明InAs1-yPy层组份为阶梯状变化的.通过对光致发光结果和X光衍射结果比较,可以看到,InAsyP1-y层通过位错和弹性畸变二种方式来释放或积累Ga1-xInxAs与InP间的失配应力,从而减少了Ga1-xInxAs中的失配位错.有效地改善了Ga1-xInxAs的质量.已获得了x高达0.94表面光亮的Ga1-xInxAs/InAs1-yPy/InP异质结材料.     

Millimeter wave beams diffracted from reflecting gratings

According to the angular-spectrum method, a radiation beam of an antenna horn in the Fresnal region is decomposed into the plane waves with the fast Fourier transform algorithm and the waves diffracted from a reflection grating are superposed as a diffracted beam. Compared with the reflected beam from the same size mirror, the radiation half width of the diffracted beam from a grating is narrower and its lateral shape is shift. These performances have been experimentally verified at Ka-band by: (1). The relative diffraction efficiencies in the first order with two triangular gratings which is put along propagating direction of a beam produced by a conical lens-horn. (2). H-plane lateral width with power—3dB lapsed of the focus beam from a grating and a mirror in a grating spectrometer for millimeter waves (25–100 GHz).     

在BBO中产生217.3-2 21.4nm高功率和频输出

用Q-YAG激光的三次谐波(355nm)与调谐的Rh·6G染料激光在β-BaB2O4(BBO)晶体中和频,获得217.3～221.4nm连续调谐输出,和频输出的最大能量为250μJ,转换效率为11%.我们还讨论了获取最大和频输出能量的一些实验条件.     

The Drazin inverses of products and differences of orthogonal projections

In this note, the Drazin inverses of products and differences of orthogonal projections on a Hilbert space are established.     

Investigation on crosslinking behaviors of NBR/PVC filled with anhydrous copper sulfate particles by dynamic mechanical analysis

Crosslinking behaviors of acrylonitrile butadiene rubber (NBR)/poly (vinyl chloride) (PVC) alloy, filled with anhydrous copper sulfate (CuSO₄) particles, were investigated for the first time by dynamic mechanical analysis (DMA) under hetero and isothermal modes, respectively. In the heterothermal testing, (NBR/PVC)/CuSO₄ compound showed two marked increases in the storage modulus (E′), corresponding to coordination crosslinking of NBR-CuSO₄ and self-crosslinking of NBR and PVC respectively. During the isothermal testing, a dramatic increase in E′ was found at the initial stage while that of original NBR/PVC alloy was not detected. The marked increase in E′ of (NBR/PVC)/CuSO₄ compound was mainly due to the crosslinking induced by coordination between  CN and Cu²⁺. The increasing extent of E′ increased with the rise of CuSO₄ content, suggesting the formation of a greater number of crosslinks. Moreover, the activation energy (E_a) of crosslinking process was about 139 kJ/mol. In this work, fourier transform infrared spectrum (FT-IR) and equilibrium swelling method were also performed for the characterization of the compound. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 41–51, 2007     

X波段介质和金属膜片混合加载行波加速结构的传播特性计算及模型腔的有关研究

计算了X波段(f=9.37GHz)介质和金属膜片混合加载行波加速结构的TM₀₁模和HEM₁₁模的色散曲线, 结果表明HEM₁₁模的截止频率比TM₀₁模的低, 说明与盘荷波导相比, 该种新加速结构单束团的BBU效应得到改善.实验研究优选得到了适用于该种新加速结构的介质(ε_r=5.812). 采用MAFIA程序优化设计了模型腔, 测试频率与设计的数值吻合得很好.     

BEPCⅡ直线加速器重大改造和束流调试进展

BEPCⅡ直线加速器的重大改造旨在获得高流强、小发射度和小能散的正负电子束, 以满足对撞机亮度提高两个两级的要求. 这对直线加速器各系统和束流物理是一个挑战. 文章介绍了直接决定束流性能的新电子源、新正电子源、新微波功率源、相位控制系统和束流测量系统等的改造情况; 叙述了束流物理研究; 介绍了束流调试进展情况和进一步改进计划.